NEC express5800 A2010b User Manual page 364

Chapter 3 Setup
Reference
The following table shows reference values of power consumption depending on configuration and running
status of the managed server.
Item name
Maximum Power Consumption (*1)
Minimum Power Consumption (*1)
(*1) These values are reference only. Actual value depends on your server configuration.
Power
Shows current power consumption of managed server.
Item name
Current
Proactive Mode
Use this mode to control power consumption of the server not exceeding the upper limit. In this mode, power
consumption is reduced by changing CPU clock speed to lower the system performance.
Item name
Proactive Mode
Power Threshold
(Pa)
(*1) Allowable range of (Minimum Power Consumption to Maximum Power Consumption)[W] depends on
server model. (The default value indicates the maximum value in allowable range.)
Important
364
Power consumption depending on configuration and running status
Power consumption depending on configuration and running status
Current power consumption
Description
Enable or disable Proactive
Mode.
Specify threshold value in
Proactive Mode.
•
If this mode is specified during OS running, it is applied immediately. If this
mode is specified while the DC power is off, it is applied at the next OS bootup.
•
Do not specify this mode during the time between DC OFF to OS startup.
•
When the operator privilege user moves to this page, 'Failed to access BMC.'
diag pops up, and nothing is displayed on the settings value. Administrator
privilege is required to refer or modify settings.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
Setup value
Statistics
Setup value
Enable/Disable
AAA to Maximum Power
Consumption [W](*1)
When Alert Mode is Enabled, AAA
is the value specified in Alert Mode
Power Threshold (Pn).
When Alert Mode is Disable, AAA is
the minimum power consumption.
7. Using Remote Management
Default
Disable
Maximum Power
Consumption (*1)