NEC express5800 A2010b User Manual page 322

Chapter 3 Setup
(c) IPv6 Property (Master)
Overview
Use this page to configure IPv6 network for BMC. Administrator privilege is required to refer or modify settings.
With A2040b, A2020b, A2010b models, you can configure IPv6 network on this page for both master and
standby BMCs.
Buttons
① [Edit] button
Press the [Edit] button to modify the setup value of each item.
② [Reload] button
Press the [Reload] button to display the latest information.
The different Edit page will be displayed depending on the current IPv6 setting.
•
Select Enable or disable IPv6 when IPv6 is disabled.
•
Select Static or Dynamic for IPv6 Address Assign Mode when IPv6 is enabled.
•
Specify static address when IPv6 is enabled.
Important
322
•
When the operator privilege user moves to this page, 'Failed to access BMC.'
diag pops up, and nothing is displayed on the settings value. Administrator
privilege is required to refer or modify settings.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
7. Using Remote Management

