Power Control - NEC express5800 A2010b User Manual

Chapter 3 Setup
9.2

Power Control

You can perform power control of the server as follows.
•
Power ON
•
Power OFF immediate
•
Soft Shutdown
•
Hard Reset
•
Force Dump
•
Power Cycle
Important
Tips
448
•
Performing these operations while the operating system is running may cause
the loss of data in the server.
•
Specify the IP address of EXPRESSSCOPE Engine SP3 on master BMC for
"IP_ADDRESS", and login user name and login password
for "USERNAME/PASSWORD" in the example.
•
Specify http or https for "PROTOCOL" in the example.
•
Do not perform any operation on WS-Management while any of the following is
running on Web console.
Tab
Remote
Access
Configuration
Update
To perform power control with WS-Management, an Operator privilege or an Administrator
privilege is required.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
Menu screen
Power Control All buttons
System Operation All buttons
IPv4 Property (Master) [Apply] button on Edit screen
IPv6 Property (Master) [Apply] button on Edit screen
Service (Master) [Apply] button on Edit screen
Backup / Restore [Backup], [Restore]
BMC [Update]
BIOS
Hardware Log [Download BMC Dump]
Device Online / Offline [Apply] button on Edit screen
Diagnosis [Execute]
9. WS-Management
Buttons on dialog