Hard Disk Drive - NEC express5800 A2010b User Manual

Chapter 2 Preparations
1.8

Hard Disk Drive

The server has device bay for hard disk drive located at the front of the server.
A hard disk drive mounted in a dedicated tray can be purchased. Install the hard disk drive on the server with it
mounted on the tray. Install a hard disk in the following order.
Single RAID card configuration: Port 0 → 1 → 2 → 3 → 4 → 5 → 6 → 7

Two RAID cards configuration:Port 0 → 4 → 1 → 5 → 2 → 6 → 3 → 7

Note the following precautions to install hard disk drives.
•
Hard disk drives having different capacities, interface types, or rotational speeds cannot be installed
together.
Bays can contain up to 8 hard disk drives.
Port numbers have been assigned to each slot.
168
Important Use hard disk drives specified by NEC. Installing a third-party hard disk drive might
cause a failure of the server as well as the hard disk drive.
Port 0
Port 1 Port 3
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
1. Installing / Removing Internal Options
Port 2 Port 4
Port 5
Port 6
Port 7