Post Error Messages - NEC express5800 A2010b User Manual
Hide thumbs
Also See for express5800 A2010b:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
Chapter 3 Setup
<F3> key:
<F4> key:
<F12> key: Boot from network.
Note
6. If a controller which has its dedicated BIOS such as a RAID Controller is installed, a message that
prompts you to start the dedicated utility to set each board is displayed.
Example: If an optional RAID Controller is installed
Press <Ctrl> <H> for Web BIOS
The utility starts by pressing <Ctrl> + <H> keys.
For details on the utility, refer to the manual supplied with each optional board.
Depending on the configuration, the message "Press Any Key" might appear to prompt a key entry.
This is a behavior of the BIOS of the optional board. Continue to operate after checking the manual
of the optional board.
7. The OS starts when POST is completed.
3.1.2 POST error messages
When POST detects an error, it displays an error message on the screen. For descriptions of error messages,
causes, and countermeasures, refer to Chapter 3 (1. POST Error Message) in "Maintenance Guide".
Note
257
Run EXPRESSBUILDER from Internal Flash Memory (optional). For information on
EXPRESSBUILDER, refer to Chapter 3 (6. EXPRESSBUILDER).
Run Offline Tools. For information on Offline Tools, refer to Chapter 1 (9. Offline Tools) in
"Maintenance Guide".
•
If the optional Internal Flash Memory is not installed in the system, <F3> key message
will not be displayed.
•
Function key must be pressed within several seconds while the message being
displayed. You can change the waiting time for keyboard entry on BIOS setup utility
(SETUP).
•
If Maintenance Mode is enabled, pressing the function key does not launch the
feature. The boot device selection screen is displayed automatically. <F2> key
message is not displayed, and a message "The system is in Maintenance Mode." is
displayed instead.
Take notes on the indication displayed on display unit before consulting with your sales
representative. Alarm messages are useful information for maintenance.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
3. Turning On the Server
Advertisement
Table of Contents
