Front View (With Front Bezel Removed) - NEC express5800 A2010b User Manual

Chapter 1 General Description
5.2

Front View (with Front Bezel Removed)

(12)-4 (12)-2
(12)-3
(12)-8 (12)-7
(13)
(14)-0
(1) SYSTEM POWER switch
Used to turn on/off the server power. Pressing this
switch once powers on the server and turns on
SYSTEM POWER LED. Pressing again powers off
the server.
Pressing for 4 seconds or longer powers off the
server forcibly.
(2) SYSTEM POWER LED
Indicates server power status.
(See Chapter 1 (5.6.1 SYSTEM POWER LED (
(3) UID (Unit ID) switch
Used to turn on/off the UID LED at front and rear of
the server. Pressing this switch once turns on UID
LED. Pressing again turns off UID LED. Some
software command can turn on (or blink) this UID
LED.
(4) UID (Unit ID) LED
Used to identify the target server.
(See Chapter 1 (5.6.2 UID LED).)
128
(11)-4 (11)-2
(12)-1 (11)-3 (11)-1
(11)-5
(12)-5
(11)-7
(12)-6
(11)-6
(11)-8
(14)-1 (14)-2 (14)-3 (14)-4
( )
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
5. Names and Functions of Components
(4)
(3)
(10) (9) (5)
(8)
(6)
(7)
(14)-5 (14)-6 (14)-7
(5) RESET switch
Used to reset the server.
(6) NMI switch
Pressing this switch starts collecting memory dump.
(7) BMC OFF switch
Pressing this switch for 4 seconds or longer shuts
down BMC of the server forcibly.
(8) SYSTEM STATUS LED
)).) Indicates system status.
(See Chapter 1 (5.6.3 SYSTEM STATUS LED (
(9) DISK ACCESS LED (
Indicates access status of all hard disk drives.
(See Chapter 1 (5.6.4 DISK ACCESS LED ( )).)
(10) Next switch
Pressing this switch for a short time displays the next
fault information. (If only one fault information exists,
the display does not change. If the last information is
currently displayed, the first information is displayed by
pressing this switch.) Pressing this switch for 4
seconds or longer clears all fault information.
(2)
(1)
(15)
(16)
(17)
( )
)
)).)