NEC express5800 A2010b User Manual page 434

Chapter 3 Setup
•
amber on
STATUS LED lights in amber.
•
amber blink
STATUS LED is blinking in amber.
Tips
(3) UID LED State acquisition
Enter the following command at the command prompt:
lampstate -uidlamp
One of the following responses is returned according to actual display state of the UID LED.
•
off
UID LED is turned off.
•
on
UID LED is turned on (lights).
•
blink
UID LED is blinking (flashing).
Tips
434
The state of the STATUS LED and the meaning are different according to the system. See
Chapter 1 (5.6.3 SYSTEM STATUS LED) for details.
If the server has no UID LED, the "UID Switch Control" feature works only to the virtual UID
LED of the Server Panel. See Chapter 1 (5.6.2 UID LED) for details of UID LED.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
8. SMASH-CLP