NEC express5800 A2010b User Manual page 351

Chapter 3 Setup
Reply-To
Subject
Message
(*1) Addresses and character strings are example.
(*2) Up to 255 1-byte alphanumeric, [-], [_], [.] and [@] can be accepted.
(*3) ASCII characters excluding [(space)] can be accepted.
(*4) Up to 63 characters excluding [+], ["], [?], [<], [>], [\](backslash), and [#] can be accepted.
(*5) Up to 255 1-byte alphanumeric and [(Space)] can be accepted.
(*6) Displayed when AES Encryption is set to "Enable".
Buttons
① Press the [Apply] button to add destination then return to List page.
② Press the [Cancel] button to return to List page.
Edit page
Use this page to modify the existing destination. To edit destination, press the [Edit] button then select [Enable]
for Alert.
Item name
Alert
To (*1)
Encryption Method (*1)
Password (*1)
Reply-To (*1)
Subject (*1)
Message (*1)
characters. (*3)
Specify a return address with up to 255 characters.
Example: root@example.com (*2)
Enter the subject with up to 63 characters. (*4)
Enter the message text with up to 255 characters.(*5)
Select Enable or Disable.
The same rule as in [Add] page is
applied.
The same rule as in [Add] page is
applied.
The same rule as in [Add] page is
applied.
The same rule as in [Add] page is
applied.
The same rule as in [Add] page is
applied.
The same rule as in [Add] page is
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide

 
Setup value
Disable
Blank
Local Encryption
Blank
Blank
Blank
Blank
7. Using Remote Management
Default setting (*2)
351