Using Remote Management; Login And Logout; Login - NEC express5800 A2010b User Manual

Chapter 3 Setup
7.

Using Remote Management

Before using remote management, read thoroughly Chapter 3 (5. EXPRESSSCOPE ENGINE SP3).
7.1

Login and Logout

7.1.1 Login

④
① User Name / Password
Enter the user name and password.
At shipment (initial state), use the default user name and password to login.
– Default IP address: 192.168.1.100(*1)
(*1) Default IP address for standby BMC is 192.168.1.101.
– Default user name: Administrator
– Default password: Administrator
② Secure Mode / Non Secure Mode
Select Secure Mode (https) or Non Secure Mode (http). Secure mode is recommended.
③ [Login] button
Click the [Login] button after entering your user name and password.
④ Language
You can select the display language on this page. The login language depends on browser and is stored in
coolie for 30 days.
⑤ Help
The online help is displayed.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
7. Using Remote Management
⑤
①
②
③
287