NEC express5800 A2010b User Manual page 354

Chapter 3 Setup
SMTP Server Edit page
Item name
Waiting time for SMTP server's
response (seconds) (*3)
Server
Port
Authentication
Authentication Method (*5)
User Name (*5)
Password (*5)
From
(*1) Addresses and character strings are example.
(*2) Factory-set value.
(*3) Specify timeout time from the time Email is sent to the time connection with SMTP server is established.
(*4) Up to 255 characters of 1-byte alphanumeric, full domain name with [-] and [.], or IPv4 address or IPv6
address can be accepted.
(*5) Displayed when Authentication is set to "Enable".
(*6) At least one method must be selected.
(*7) String up to 64 characters excluding [ ](Space), ["], [?], [=], [<] and [>] can be accepted.
(*8) String up to 19 characters excluding [ ](Space), ["], [?], [=], [<] and [>] can be accepted.
(*9) Up to 255 characters of 1-byte alphanumeric, [-], [_], [.] and [@] can be accepted.
Buttons
① [Apply] button
Apply the edited value and return to Configuration page.
② [Default] button
Set the factory-set value. This value is not applied unless [Apply] button is pressed.
③ [Cancel] button
Return to Configuration page without applying the edited value.
354
30 to 600
smtp.example.com (*4)
1 to 65535
Disable/Enable
Select SMTP authentication method. (*6)
CRAM-MD5
LOGIN
PLAIN
User name used in SMTP authentication
(*7)
Password in SMTP authentication (*8)
Sender name (*9)
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
7. Using Remote Management
  
Setup value(*1) Default setting(*2)
30
Blank
25
Disable
Enable All
Blank
Blank
Blank