Ip Multicasting Commands - D-Link DXS-3326GSR Reference Manual

The IP multicasting commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command
show ipmc cache
show ipmc
Each command is listed, in detail, in the following sections.
show ipmc cache
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To display the current IP multicast forwarding cache:
DXS-3326GSR Stackable Gigabit Layer 3 Switch
Parameters
{group <group>} {ipaddress <network_address>}
{ipif <ipif_name 12> | [inactive | pim | dvmrp}
Used to display the current IP multicast forwarding cache.
show ipmc cache {group <group>} {ipaddress
<network_address>}
This command will display the current IP multicast forwarding
cache.
group <group> − The multicast group IP address.
ipaddress <network_address> − The IP address and netmask of
the source. You can specify the IP address and netmask
information using the traditional format or the CIDR format. For
example, 10.1.2.3/255.255.0.0 or 10.2.3.4/16.
None.
IP M
ULTICASTING
307
39
C
OMMANDS