D-Link DXS-3326GSR Reference Manual page 98

DXS-3326GSR:4#show stp ports 1:1-1:9
Command: show stp ports 1:1-1:9
MSTP Port Information
----------------------
Port Index
External PathCost : Auto/200000 , Edge Port : No /No , P2P : Auto /Yes
Msti Designated Bridge
----- ------------------
0 8000/0050BA7120D6
1 8001/0053131A3324
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
show stp instance_id
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the STP instance configuration for instance 0 (the internal CIST) on the Switch:
DXS-3326GSR:4#show stp instance 0
Command: show stp instance 0
STP Instance Settings
---------------------------
Instance Type
Instance Status
Instance Priority
STP Instance Operational Status
--------------------------------
Designated Root Bridge : 32766/00-90-27-39-78-E2
DXS-3326GSR Stackable Gigabit Layer 3 Switch
: 1:1 , Hello Time: 2 /2 ,
Internal PathCost Prio
-----------------
200000
200000
Used to display the Switch's STP instance configuration
show stp instance_id <value 0-15>
This command displays the Switch's current STP Instance
Settings and the STP Instance Operational Status.
<value 0-15> - Enter a value defining the previously configured
instance_id on the Switch. An entry of 0 will display the STP
configuration for the CIST internally set on the Switch.
None
: CIST
: Enabled
: 32768(bridge priority : 32768, sys ID ext : 0 )
Port STP enabled
Status
---- ----------
128 Forwarding
128 Forwarding
90
Role
----------
Root
Master