D-Link DXS-3326GSR Reference Manual page 257

Example usage:
To view SIM neighbors:
DXS-3326GSR:4#show sim neighbor
Command: show sim neighbor
Neighbor Info Table
Port MAC Address
------ ------------------
23 00-35-26-00-11-99 Commander
23 00-35-26-00-11-91 Member
24 00-35-26-00-11-90 Candidate
Total Entries: 3
DXS-3326GSR:4#
reconfig
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To connect to the MS, with member id 2, through the CS, using the command line interface:
DXS-3326GSR:4#reconfig member_id 2
Command: reconfig member_id 2
DXS-3326GSR:4#
config sim_group
Purpose
DXS-3326GSR Stackable Gigabit Layer 3 Switch
Role
---------
Used to connect to a member switch, through the commander switch
using telnet.
reconfig [member_id <value 1-32 | exit]
This command is used to reconnect to a member switch using telnet.
member_id <value 1-32> - Select the ID number of the member
switch the user desires to configure.
exit – This command is used to exit from managing the member
switch and will return to managing the commander switch.
Only administrator-level users can issue this command.
Used to add candidates and delete members from the SIM group.
249