D-Link DXS-3326GSR Reference Manual page 117

Example usage:
To configure a Combination Queue with a Class 6 priority queue, with strict priority, and the remaining Classes as
weighted round robin (WRR) scheduling:
DXS-3326GSR:4# config scheduling 6 max_packet 0
Command: config scheduling 6 max_packet 0
Success.
DXS-3326GSR:4#
show scheduling
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current scheduling configuration with Class 1 as the strict priority queue of a Combination Queue:
DXS-3326GSR:4# show scheduling
Command: show scheduling
QOS Output Scheduling
Class-0
Class-1
Class-2
Class-3
Class-4
Class-5
Class-6
DXS-3326GSR Stackable Gigabit Layer 3 Switch
Used to display the currently configured traffic scheduling on the
Switch.
show scheduling
The show scheduling command displays the current
configuration for the maximum number of packets (max_packets)
assigned to the seven hardware priority queues on the Switch. At
this value, it will empty the seven hardware priority queues in
order, from the highest priority (queue 6) to the lowest priority
(queue 0).
None.
None.
MAX. Packets
-------------------
1
0
3
4
5
6
7
109