D-Link DXS-3326GSR Reference Manual page 194

show authen parameter
Parameters
Restrictions
DXS-3326GSR:4#show authen parameter
Command: show authen parameter
Response timeout: 60 seconds
User attempts
DXS-3326GSR:4#
enable admin
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable administrator privileges on the Switch:
DXS-3326GSR:4#enable admin
Password: ******
DXS-3326GSR Stackable Gigabit Layer 3 Switch
Response timeout – The configured time allotted for the Switch to
wait for a response of authentication from the user attempting to log
in from the command line interface or telnet interface.
User attempts – The maximum number of attempts the user may try
to become authenticated by the Switch, before being locked out.
None.
None.
: 5
Used to promote user level privileges to administrator level privileges
enable admin
This command is for users who have logged on to the Switch on the
normal user level, to become promoted to the administrator level.
After logging on to the Switch users, will have only user level
privileges. To gain access to administrator level privileges, the user
will enter this command and will have to enter an authentication
password. Possible authentication methods for this function include
TACACS/XTACACS/TACACS+, RADIUS, user defined server
groups, local enable (local account on the Switch), or no
authentication (none). Because XTACACS and TACACS do not
support the enable function, the user must create a special account
on the server host which has the username "enable", and a
password configured by the administrator that will support the
"enable" function. This function becomes inoperable when the
authentication policy is disabled.
None.
Only administrator-level users can issue this command.
186