D-Link DXS-3326GSR Reference Manual page 191

delete authen server_group
Parameters
Restrictions
Example usage:
To delete the server group "group_1":
DXS-3326GSR:4#delete server_group group_1
Command: delete server_group group_1
Success.
DXS-3326GSR:4#
show authen server_group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the authentication server group:
DXS-3326GSR Stackable Gigabit Layer 3 Switch
<string 15> - Enter an alphanumeric string of up to 15 characters to
define the previously created server group the user wishes to delete.
Only administrator-level users can issue this command.
Used to view authentication server groups on the Switch.
show authen server_group <string 15>
This command will display authentication server groups currently
configured on the Switch.
This command will display the following fields:
Group Name: The name of the server group currently configured on
the Switch, including built in groups and user defined groups.
IP Address: The IP address of the server host.
Protocol: The authentication protocol used by the server host.
<string 15> - Enter an alphanumeric string of up to 15 characters to
define the previously created server group to view.
Entering this command without the <string> parameter will display all
authentication server groups on the Switch.
None.
183