D-Link DXS-3326GSR Reference Manual page 338

DXS-3326GSR:4#config ospf all state enable
Command: config ospf all state enable
Success.
DXS-3326GSR:4#
show ospf ipif
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example
To display the current OSPF interface settings, for a specific OSPF interface:
DXS-3326GSR:4#show ospf ipif ipif2
Command: show ospf ipif ipif2
Interface Name: ipif2
Network Medium Type: BROADCAST
Area ID: 1.0.0.0
Priority: 1
DR Address: 123.234.12.34
Hello Interval: 10
Transmit Delay: 1
Authentication: None
Total Entries: 1
DXS-3326GSR:4#
show ospf all
Purpose
Syntax
Description
DXS-3326GSR Stackable Gigabit Layer 3 Switch
Used to display the current OSPF interface settings for the
specified interface name.
show ospf ipif {<ipif_name 12>}
This command will display the current OSPF interface settings for
the specified interface name.
<ipif_name 12> − The IP interface name for which you want to
display the current OSPF interface settings.
None.
IP Address: 123.234.12.34/24 ((Link Up)
Metric: 1
Administrative State: Enabled
DR State: DR
Backup DR Address: None
Dead Interval: 40
Retransmit Time: 5
Used to display the current OSPF settings of all the OSPF
interfaces on the Switch.
show ospf all
This command will display the current OSPF settings for all OSPF
interfaces on the Switch
330