Chapter 41 Ip Multicasting Commands - D-Link DGS-3620-52P Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Chapter 41
show ipmc {ipif <ipif_name 12> | protocol [inactive | dvmrp | pim]}
show ipmc cache {group <group>} {ipaddress <network_address>}
41-1 show ipmc
Description
This command is used to display the IP Multicast interface table.
Format
show ipmc {ipif <ipif_name 12> | protocol [inactive | dvmrp | pim]}
Parameters
ipif - (Optional) Specifies the IP interface name used.
<ipif_name 12> - Enter the IP interface name used here. This name can be up to 12
characters long.
protocol - (Optional) Specifies which kind of routing protocol interface table will be displayed.
inactive - Specifies that the protocol display will be inactive.
dvmrp - Specifies that the DVMRP protocol will be displayed.
pim - Specifies that the PIM protocol will be displayed.
If no parameter is specified, the system will display all IP multicast interfaces.
Restrictions
None.
Example
To display the IP Multicast interface table:
IP Multicasting
Commands
492