D-Link DXS-3326GSR Reference Manual page 132

DXS-3326GSR Stackable Gigabit Layer 3 Switch
create vlan
Switch to forward packets to this VLAN if the tag in the
packet header is concurrent with this protocol. This packet
header information is defined by the AppleTalk protocol.
protocol-decLAT - Using this parameter will instruct the
Switch to forward packets to this VLAN if the tag in the
packet header is concurrent with this protocol. This packet
header information is defined by the Digital Equipment
Corporation (DEC) Local Area Transport (LAT) protocol.
protocol–decOther - Using this parameter will instruct the
Switch to forward packets to this VLAN if the tag in the
packet header is concurrent with this protocol. This packet
header information is defined by the Digital Equipment
Corporation (DEC) Protocol.
protocol–sna802dot2 - Using this parameter will instruct
the Switch to forward packets to this VLAN if the tag in the
packet header is concurrent with this protocol. This packet
header information is defined by the Systems Network
Architecture(SNA) 802.2 Protocol.
protocol-netBios - Using this parameter will instruct the
Switch to forward packets to this VLAN if the tag in the
packet header is concurrent with this protocol. This packet
header information is defined by the NetBIOS Protocol.
protocol-xns - Using this parameter will instruct the Switch
to forward packets to this VLAN if the tag in the packet
header is concurrent with this protocol. This packet header
information is defined by the Xerox Network Systems (XNS)
Protocol.
protocol-vines - Using this parameter will instruct the
Switch to forward packets to this VLAN if the tag in the
packet header is concurrent with this protocol. This packet
header information is defined by the Banyan Virtual
Intergrated Network Service (VINES) Protocol.
protocol-ipV6 - Using this parameter will instruct the
Switch to forward packets to this VLAN if the tag in the
packet header is concurrent with this protocol. This packet
header information is defined by the Internet Protocol Version
6 (IPv6) Protocol.
protocol – userDefined - Using this parameter will instruct
the Switch to forward packets to this VLAN if the tag in the
packet header is concurrent with this protocol defined by the
user. This packet header information is defined by entering
the following information:
<hex 0x0-0xffff> - Specifies that the VLAN will only accept
packets with this hexadecimal 802.1Q Ethernet type value in
the packet header.
encap [ethernet | llc | snap | all] – Specifies that the Switch
will examine the octet of the packet header referring to one of
the protocols listed (Ethernet, LLC or SNAP), looking for a
124