D-Link DXS-3326GSR Reference Manual page 160

config router_ports_forbidden
Syntax
Description
Parameters
Restrictions
Example usage:
To set up forbidden router ports:
DXS-3326GSR:4#config router_ports_forbidden default add 2:1-2:10
Command: config router_ports_forbidden default add 2:1-2:10
Success.
DXS-3326GSR:4#
show router_ports
Purpose
Syntax
Description
Parameters
DXS-3326GSR Stackable Gigabit Layer 3 Switch
config router_ports_forbidden <vlan_name 32> [add | delete]
<portlist>
This command allows you to designate a port or range of ports as
being forbidden to multicast-enabled routers. This will ensure that
multicast packets will not be forwarded to this port − regardless of
protocol, etc.
<vlan_name 32> − The name of the VLAN on which the router port
resides.
[add | delete] - Specifies whether to add or delete forbidden ports of
the specified VLAN.
<portlist> − Specifies a range of ports that will be configured as
forbidden router ports. The port list is specified by listing the lowest
switch number and the beginning port number on that switch,
separated by a colon. Then the highest switch number, and the
highest port number of the range (also separated by a colon) are
specified. The beginning and end of the port list range are separated
by a dash. For example, 1:3 specifies switch number 1, port 3. 2:4
specifies switch number 2, port 4. 1:3-2:4 specifies all of the ports
between switch 1, port 3 and switch 2, port 4 − in numerical order.
Only administrator-level users can issue this command.
Used to display the currently configured router ports on the
Switch.
show router_ports {vlan <vlan_name 32>} {static | dynamic |
forbidden}
This command will display the router ports currently configured on
the Switch.
<vlan_name 32> − The name of the VLAN on which the router
port resides.
static − Displays router ports that have been statically configured.
dynamic − Displays router ports that have been dynamically
152