D-Link DXS-3326GSR Reference Manual page 97

STP Status
STP Version
Max Age
Hello Time
Forward Delay
Max Age
TX Hold Count
Forwarding BPDU
DXS-3326GSR:4#
Status 3 : STP enabled for MSTP
DXS-3326GSR:4#show stp
Command: show stp
STP Status
STP Version
Max Age
Forward Delay
Max Age
TX Hold Count
Forwarding BPDU
DXS-3326GSR:4#
show stp ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show stp ports 1 through 9 on switch one:
DXS-3326GSR Stackable Gigabit Layer 3 Switch
: Enabled
: RSTP
: 20
: 2
: 15
: 20
: 3
: Enabled
: Enabled
: MSTP
: 20
: 15
: 20
: 3
: Enabled
Used to display the Switch's current instance_id configuration.
show stp ports <portlist>
This command displays the STP Instance Settings and STP
Instance Operational Status currently implemented on the Switch.
<portlist> − Specifies a range of ports to be viewed. The port list
is specified by listing the lowest switch number and the beginning
port number on that switch, separated by a colon. Then the
highest switch number, and the highest port number of the range
(also separated by a colon) are specified. The beginning and end
of the port list range are separated by a dash. For example, 1:3
specifies switch number 1, port 3. 2:4 specifies switch number 2,
port 4. 1:3-2:4 specifies all of the ports between switch 1, port 3
and switch 2, port 4 − in numerical order.
None
89