D-Link DXS-3326GSR Reference Manual page 101

create fdb
Restrictions
Example usage:
To create a unicast MAC FDB entry:
create multicast_fdb
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create multicast MAC forwarding:
DXS-3326GSR:4#create multicast_fdb default 01-00-00-00-00-01
Command: create multicast_fdb default 01-00-00-00-00-01
Success.
DXS-3326GSR:4#
config multicast_fdb
Purpose
DXS-3326GSR Stackable Gigabit Layer 3 Switch
specifies all of the ports between switch 1, port 3 and switch 2,
port 4 − in numerical order.
Only administrator-level users can issue this command.
DXS-3326GSR:4#create fdb default 00-00-00-00-01-02 port 2:5
Command: create fdb default 00-00-00-00-01-02 port 2:5
Success.
DXS-3326GSR:4#
Used to create a static entry to the multicast MAC address
forwarding table (database)
create multicast_fdb <vlan_name 32> <macaddr>
This command will make an entry into the Switch's multicast MAC
address forwarding database.
<vlan_name 32> − The name of the VLAN on which the MAC
address resides.
<macaddr> − The MAC address that will be added to the
forwarding table.
Only administrator-level users can issue this command.
Used to configure the Switch's multicast MAC address forwarding
database.
93