config ssh user
Restrictions
Example usage:
To configure the SSH user:
DXS-3326GSR:4# config ssh user Trinity authmode password
Command: config ssh user Trinity authmode password
Success.
DXS-3326GSR:4#
show ssh user authmode
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the SSH user:
DXS-3326GSR:4#show ssh user authmode
Command: show ssh user authmode
Current Accounts:
UserName
--------------------------
Trinity
DXS-3326GSR:4#
DXS-3326GSR Stackable Gigabit Layer 3 Switch
password – This parameter should be chosen if the user
wishes to use an administrator defined password for
authentication. Upon entry of this command, the Switch will
prompt the user for a password, and then to retype the
password for confirmation.
publickey – This parameter should be chosen if the user
wishes to use the publickey on a SSH server for authentication.
Only administrator-level users can issue this command.
Used to display the SSH user setting.
show ssh user authmode
This command allows you to display the current SSH user setting.
None.
None.
Authentication
--------------------------
Publickey
address of the SSH user.
193