D-Link DXS-3326GSR Reference Manual page 227

config radius
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the RADIUS settings:
show radius
Purpose
Syntax
Description
Parameters
Restrictions
DXS-3326GSR Stackable Gigabit Layer 3 Switch
Used to configure the Switch's RADIUS settings.
config radius <server_index 1-3> {ipaddress <server_ip> | key
<passwd 32> | auth_port <udp_port_number 1-65535> |
acct_port <udp_port_number 1-65535>}
The config radius command is used to configure the Switch's
RADIUS settings.
<server_index 1-3> − Assigns a number to the current set of
RADIUS server settings. Up to 3 groups of RADIUS server
settings can be entered on the Switch.
ipaddress <server_ip> − The IP address of the RADIUS server.
key − Specifies that a password and encryption key will be used
between the Switch and the RADIUS server.
<passwd 32> − The shared-secret key used by the
RADIUS server and the Switch. Up to 32 characters can be
used.
auth_port <udp_port_number> − The UDP port number for
authentication requests. The default is 1812.
acct_port <udp_port_number> − The UDP port number for
accounting requests. The default is 1813.
Only administrator-level users can issue this command.
DXS-3326GSR:4#config radius 1 10.48.74.121 key dlink default
Command: config radius 1 10.48.74.121 key dlink default
Success.
DXS-3326GSR:4#
Used to display the current RADIUS configurations on the Switch.
show radius
The show radius command is used to display the current
RADIUS configurations on the Switch.
None.
None.
219