D-Link DXS-3326GSR Reference Manual page 118

DXS-3326GSR:4#
config 802.1p user_priority
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure 802.1 user priority on the Switch:
DXS-3326GSR:4# config 802.1p user_priority 1 3
Command: config 802.1p user_priority 1 3
Success.
DXS-3326GSR:4#
DXS-3326GSR Stackable Gigabit Layer 3 Switch
Used to map the 802.1p user priority tags of an incoming packet
to one of the seven hardware queues available on the Switch.
config 802.1p user_priority <priority 0-7> <class_id 0-6>
The config 802.1p user_priority command is used to configure
the way the Switch will map an incoming packet, based on its
802.1p user priority tag, to one of the seven hardware priority
queues available on the Switch. The Switch's default is to map the
incoming 802.1p priority values to the seven hardware priority
queues according to the following chart:
802.1p Switch Hardware
Value Priority Queue
--------- ------------------
0 2
1 0
2 1
3 3
4 4
5 5
6 6
7 6
<priority 0-7> − Specifies which of the eight 802.1p priority tags (0
through 7) you want to map to one of the Switch's hardware
priority queues (<class_id>, 0 through 6).
<class_id 0-6> − Specifies which of the Switch's hardware priority
queues the 802.1p priority tags (specified above) will be mapped
to.
Only administrator-level users can issue this command.
110