D-Link DXS-3326GSR Reference Manual page 56

delete snmp host
Parameters
Restrictions
Example usage:
To delete an SNMP host entry:
DXS-3326GSR:4#delete snmp host 10.48.74.100
Command: delete snmp host 10.48.74.100
Success.
DXS-3326GSR:4#
show snmp host
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the currently configured SNMP hosts on the Switch:
DXS-3326GSR:4#show snmp host
Command: show snmp host
SNMP Host Table
Host IP Address
---------------
10.48.76.23
10.48.74.100
Total Entries: 2
DXS-3326GSR Stackable Gigabit Layer 3 Switch
traps generated by the Switch's SNMP agent.
<ipaddr> − The IP address of a remote SNMP manager that will
receive SNMP traps generated by the Switch's SNMP agent.
Only administrator-level users can issue this command.
Used to display the recipient of SNMP traps generated by the
Switch's SNMP agent.
show snmp host {<ipaddr>}
The show snmp host command is used to display the IP
addresses and configuration information of remote SNMP
managers that are designated as recipients of SNMP traps that
are generated by the Switch's SNMP agent.
<ipaddr> − The IP address of a remote SNMP manager that will
receive SNMP traps generated by the Switch's SNMP agent.
None.
SNMP Version Community Name/SNMPv3 User Name
--------------------- ------------------------------
V2c
V3 authpriv
private
public
48