D-Link DXS-3326GSR Reference Manual page 178

DXS-3326GSR:4#show authen_login all
Command: show authen_login all
Method List Name Priority
----------------
Darren
default
GoHabs!
Trinity
DXS-3326GSR:4#
create authen_enable method_list_name
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create a user-defined method list, named "Permit" for promoting user privileges to Administrator privileges:
DXS-3326GSR:4#create authen_enable method_list_name Permit
Command: create authen_enable method_list_name Permit
Success.
DXS-3326GSR:4#
config authen_enable
Purpose
DXS-3326GSR Stackable Gigabit Layer 3 Switch
Method Name Comment
-------- ---------------
1 tacacs+
1 radius
1 Newfie
1 local
Used to create a user-defined method list of authentication
methods for promoting normal user level privileges to Administrator
level privileges on the Switch.
create authen_enable method_list_name <string 15>
This command is used to promote users with normal level
privileges to Administrator level privileges using authentication
methods on the Switch. Once a user acquires normal user level
privileges on the Switch, he or she must be authenticated by a
method on the Switch to gain administrator privileges on the Switch,
which is defined by the Administrator. A maximum of eight (8)
enable method lists can be implemented on the Switch.
<string 15> - Enter an alphanumeric string of up to 15 characters to
define the given enable method list the user wishes to create.
Only administrator-level users can issue this command.
Used to configure a user-defined method list of authentication
methods for promoting normal user level privileges to Administrator
---------
Built-in Group
Built-in Group
User-defined Group
Keyword
170