D-Link DXS-3326GSR Reference Manual page 59

To enable SNMP trap support on the Switch:
DXS-3326GSR:4#enable snmp traps
Command: enable snmp traps
Success.
DXS-3326GSR:4#
enable snmp authenticate_traps
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To turn on SNMP authentication trap support:
DXS-3326GSR:4#enable snmp authenticate_traps
Command: enable snmp authenticate_traps
Success.
DXS-3326GSR:4#
show snmp traps
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the current SNMP trap support:
DXS-3326GSR:4#show snmp traps
Command: show snmp traps
DXS-3326GSR Stackable Gigabit Layer 3 Switch
Used to enable SNMP authentication trap support.
enable snmp authenticate_traps
This command is used to enable SNMP authentication trap
support on the Switch.
None.
Only administrator-level users can issue this command.
Used to show SNMP trap support on the Switch .
show snmp traps
This command is used to view the SNMP trap support status
currently configured on the Switch.
None.
Only administrator-level users can issue this command.
51