D-Link DXS-3326GSR Reference Manual page 158

enable igmp_snooping
Description
Parameters
Restrictions
Example usage:
To enable IGMP snooping on the Switch:
DXS-3326GSR:4#enable igmp_snooping
Command: enable igmp_snooping
Success.
DXS-3326GSR:4#
disable igmp_snooping
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable IGMP snooping on the Switch:
DXS-3326GSR Stackable Gigabit Layer 3 Switch
This command allows you to enable IGMP snooping on the
Switch. If forward_mcrouter_only is specified, the Switch will
only forward all multicast traffic to the multicast router, only.
Otherwise, the Switch forwards all multicast traffic to any IP
router.
forward_mcrouter_only − Specifies that the Switch should only
forward all multicast traffic to a multicast-enabled router.
Otherwise, the Switch will forward all multicast traffic to any IP
router.
Only administrator-level users can issue this command.
Used to enable IGMP snooping on the Switch.
disable igmp_snooping {forward_mcrouter_only}
This command disables IGMP snooping on the Switch. IGMP
snooping can be disabled only if IP multicast routing is not being
used. Disabling IGMP snooping allows all IGMP and IP multicast
traffic to flood within a given IP interface. If
forward_mcrouter_only is specified, the Switch will forward all
multicast traffic to any IP router.
forward_mcrouter_only − Specifies that the Switch will forward all
multicast traffic to any IP router.
Only administrator-level users can issue this command.
150