D-Link DXS-3326GSR Reference Manual page 48

create snmp community
Syntax
Description
Parameters
Restrictions
Example usage:
To create the SNMP community string "dlink:"
DXS-3326GSR:4#create snmp community dlink view ReadView read_write
Command: create snmp community dlink view ReadView read_write
Success.
DXS-3326GSR:4#
delete snmp community
Purpose
Syntax
Description
Parameters
Restrictions
DXS-3326GSR Stackable Gigabit Layer 3 Switch
create snmp community <community_string 32> view
<view_name 32> [read_only | read_write]
The create snmp community command is used to create an SNMP
community string and to assign access-limiting characteristics to this
community string.
<community_string 32> − An alphanumeric string of up to 32
characters that is used to identify members of an SNMP community.
This string is used like a password to give remote SNMP managers
access to MIB objects in the Switch's SNMP agent.
view <view_name 32> − An alphanumeric string of up to 32
characters that is used to identify the group of MIB objects that a
remote SNMP manager is allowed to access on the Switch.
read_only − Specifies that SNMP community members using the
community string created with this command can only read the
contents of the MIBs on the Switch.
read_write − Specifies that SNMP community members using the
community string created with this command can read from and
write to the contents of the MIBs on the Switch.
Only administrator-level users can issue this command.
Used to remove a specific SNMP community string from the
Switch.
delete snmp community <community_string 32>
The delete snmp community command is used to remove a
previously defined SNMP community string from the Switch.
<community_string 32> − An alphanumeric string of up to 32
characters that is used to identify members of an SNMP
community. This string is used like a password to give remote
SNMP managers access to MIB objects in the Switch's SNMP
agent.
Only administrator-level users can issue this command.
40