D-Link DXS-3326GSR Reference Manual page 27

enable clipaging
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable pausing of the screen display when the show command output reaches the end of the page:
DXS-3326GSR:4#enable clipaging
Command: enable clipaging
Success.
DXS-3326GSR:4#
disable clipaging
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
DXS-3326GSR Stackable Gigabit Layer 3 Switch
DXS-3326GSR:4#config serial_port baud_rate 115200
Command: config serial_port baud_rate 115200
Success.
DXS-3326GSR:4#
Used to pause the scrolling of the console screen when the show
command displays more than one page.
enable clipaging
This command is used when issuing the show command which
causes the console screen to rapidly scroll through several
pages. This command will cause the console to pause at the end
of each page. The default setting is enabled.
None.
Only administrator-level users can issue this command.
Used to disable the pausing of the console screen scrolling at
the end of each page when the show command displays more
than one screen of information.
disable clipaging
This command is used to disable the pausing of the console
screen at the end of each page when the show command
would display more than one screen of information.
None.
Only administrator-level users can issue this command.
19