Commands - D-Link DXS-3326GSR Reference Manual

The DXS-3326GSR implements the server-side of the IEEE 802.1x Port-based and MAC-based Network Access Control. This
mechanism is intended to allow only authorized users, or other network devices, access to network resources by establishing
criteria for each port on the Switch that a user or network device must meet before allowing that port to forward or receive
frames.
Command
enable 802.1x
disable 802.1x
create 802.1x user
show 802.1x user
delete 802.1x user
show 802.1x
auth_state
show 802.1x
auth_configuration
config 802.1x
auth_mode
config 802.1x
capability
config 802.1x
auth_parameter ports
config 802.1x
auth_protocol
config 802.1x init
config 802.1x reauth
config radius add
config radius delete
config radius
show radius
show acct_client
DXS-3326GSR Stackable Gigabit Layer 3 Switch
Parameters
<username 15>
ports [<portlist> | all]
ports [<portlist> | all]
[port_based | mac_based]
[ports <portlist> | all] [authenticator | none]
[<portlist> | all] [default | {direction [both | in] | port_control
[force_unauth | auto | force_auth] | quiet_period <sec 0-65535> |
tx_period <sec 1-65535> | supp_timeout <sec 1-65535> |
server_timeout <sec 1-65535> | max_req <value 1-10> |
reauth_period <sec 1-65535> | enable_reauth [enable | disable]}]
[local | radius eap]
{port_based ports [<portlist> | all]} | mac_based [ports] [<portlist> |
all] {mac_address <macaddr>}]
{port_based ports [<portlist> | all]} [<portlist> | all] {mac_address
<macaddr>}]
<server_index 1-3> <server_ip> key <passwd 32> [default
{auth_port <udp_port_number 1-65535> | acct_port
<udp_port_number 1-65535>}]
<server_index 1-3>
<server_index 1-3> {ipaddress <server_ip> | key <passwd 32>
[auth_port <udp_port_number 1-65535> acct_port
<udp_port_number 1-65535>]}
802.1X C
204
24
OMMANDS