Omron CS1W-SCU21 Operation Manual page 505

Hayes Modem AT Command Protocol
MD144FB5V (OMRON, No longer manufactured.)
The following command is set in the words specified by the second operand of PMCR(260).
ATE0V0X4\V2\N3%C0*C0\Q0&M0&D0%B9600S26=10
0017 0029
A T E 0 V 0 X 4 \ V 2 \ N 3 % C 0 * C 0 \ Q 0 & M 0 & D 0 % B 9
ME1414BIII/ME2814BII (OMRON)
The following command is set in the words specified by the second operand of PMCR(260).
AT\J1B8E0V0S0=1X4\V2\N3&M0%C0&D0&E0\X1S26=10
0018 002C
A T \ J 1 B 8 E 0 V 0 S 0 = 1 X 4 \ V 2 \ N 3 & M 0 % C 0 & D 0
Note Turn ON DIP switch SW3 on in the rear of the Modem.
Dialling (Sequences No. 561 (Hex 0231), No. 571 (Hex 023B), and
No. 581 (Hex 0245))
To dial a telephone numbers for the OMRON ME1414BIII/ME2814BII Modems using sequences No. 561, 571,
581, set the dialling command and telephone number in the words specified by the 3rd operand of PMCR(260).
However, for other Modems, make the following settings for the Data Send/Receive sequence.
This is an example of telephone number settings for the above mentioned 4 OMRON Modems.
Operand and Send Data Word Settings of PMCR(260)
Setting Example
If telephone number is 03-0123-4567
000A 0010 4154
A T
Note 1. This example uses a tone line. Change ATDT to ATDP for pulse lines.
2. Fill the telephone number to the left in the words if the character string length of the dialling operation
is an odd number of bytes.
486
Character string length of modem initialization command (bytes)
Code length of PMCR(260) when it is used (words)
Character string length of modem initialization command (bytes)
Code length of PMCR(260) when it is used (words)
OPR 2 MD24FB10V
MD144FB5V
ME1414BIII/ME2814BII
OPR 3 First address S of send data (dialling operation)
OPR 4 None (Set #0000)
S+0 Number of words from address set for operand 2 to end of data 4 digits Hex
S+1 Number of bytes of send data (dialling operation)
S+2 Send data (dialling operation)
: (Fill data to left for odd numbers of bytes)
S+n
4454 3033 2D30 3132
D T 0 3 – 0 1 2
Character string length of dialling operation sent to modem (bytes)
Code length of PMCR(260) when it is used (words)
6 0 0 S 2 6 = 1 0
& E 0 \ X 1 S 2 6 = 1 0
#0231
#023B
#0245
332D 3435 3637
3 – 4 5 6 7
Appendix N
4 digits Hex
ASCII