Omron CS1W-SCU21 Operation Manual page 481

V600/V620 ID Controller Protocol
Polling Auto-read (ASCII) (Sequence No. 510 (Hex 01FE))
This sequence is used when the number of Heads to be read from the Carrier is from 1 to 8.
Send Data Word Allocation (3rd Operand of PMCR(260))
First word of send
data
+(4(N–1)+2)
+(4(N–1)+3)
+(4(N–1)+4)
+(4(N–1)+5)
Receive Data Word Allocation (4th Operand of PMCR(260))
None.
Note 1. Execute Sequence No. 510 before executing Sequence No. 511, 512, 513.
2. Execute Sequence No. 544 (Polling Auto-read Command Processing Cancel) to cancel the polling
auto-read.
3. Retry processing is not performed for this sequence.
Polling Auto-read Sub-command (ASCII/2) (Sequence No. 511
(Hex 01FF))
This sequence is used when the maximum number of Heads to be read from the Carrier is 2. Up to 118 bytes
of data can be read for each Read/Write Head.
Send Data Word Allocation (3rd Operand of PMCR(260))
The send data word allocation is similar to that of Sequence No. 501 (Read (ASCII/2)). However, the leading
address No. and number of read bytes are not used and will be the value specified for sequence #510.
Receive Data Word Allocation (4th Operand of PMCR(260))
The receive data word allocation is similar to that of Sequence No. 501 (Read (ASCII/2)).
462
Number of send data words
+0
Number of Heads
+1
(Undefined)
+2
(Undefined)
+3
Leading address No.
+4
(Undefined)
+5 Read bytes
~
(Undefined)
(Undefined)
Leading address No.
(Undefined)
Read bytes
Offset Contents (data format)
+0 Number of send data words
(4 digits Hex)
+1 Number of Heads
(4 digits BCD)
+(4(N–1)+2) Unit No. (2 digits BCD)
+(4(N–1)+3) R/W Head CH No.
(1 digit BCD)
+(4(N–1)+4) Leading address No.
(4 digits Hex)
+(4(N–1)+5) Read bytes
(2 digits Hex)
N: Number of Heads
Unit No.
Head CH No.
CH 1
~
Unit No.
Head CH No.
CH N
* N: Number of Heads
0006 to 0022 (6 to 34 decimal)
0001 to 0008
Arbitrary (However, there is a limit for the max-
imum Unit No. depending on the model)
R/W Head CH 1 designation: 1
R/W Head CH 2 designation: 2
The CD1D must be set to 1.
0000 to FFFF
If number of Heads is 2 or less
01 to 76 (1 to 118 bytes)
If number of Heads is 4 or less
01 to 30 (1 to 48 bytes)
If number of Heads is 8 or less
01 to 20 (1 to 20 bytes)
Appendix M
Data