Omron CS1W-SCU21 Operation Manual page 432

3Z4L Laser Micrometer Protocol
Receive Data Word Allocation (4th Operand of PMCR(260))
None.
Note 1. This sequence cannot be used when DIP switch SW3, pin 5 of the Laser Micrometer is not turned ON.
2. This sequence will be processed the same as sequence No. 425 AVG move (H) times set for 5000-
series Laser Micrometers.
Automatic Detection Set (3000-series, High-speed Type)
(Sequence No. 427 (Hex 01AB))
This sequence sets the work automatic detection function.
Send Data Word Allocation (3rd Operand of PMCR(260))
Receive data
storage words
Receive Data Word Allocation (4th Operand of PMCR(260))
None.
Note 1. This sequence cannot be used when DIP switch SW3, pin 5 of the Laser Micrometer is not turned ON.
2. The detection lower and upper limit must be set with 3 digits for the integer portion and 4 digits for the
decimal portion.
Automatic Detection Release (3000-series, High-speed Type)
(Sequence No. 428 (Hex 01AC))
This sequence releases the setting of work automatic detection function.
Send Data Word Allocation (3rd Operand of PMCR(260))
None.
Receive Data Word Allocation (4th Operand of PMCR(260))
None.
+0 Number of send data words
+1 The number of measuring times
(Undefined)
+2 Invalid time
+3 Decimal portion
+4
(Undefined)
+5
Sign
+6 Decimal portion
+7 (Undefined)
+8
Sign
Offset Contents (data format)
+0 Number of send data words
(4 digits Hex)
+1 Number of measurements
(3 digits BCD)
+2 Invalid time (4 digits BCD)
+3 Detection lower limit (deci-
mal portion)
(4 digits BCD)
+4 Detection lower limit (integer
portion)
(3 digits BCD)
+5 Detection lower limit (Sign)
(ASCII 1 character)
+6 to +8 Detection upper limit
Detection lower limit
Integer portion
(Undefined)
Detection upper limit
Integer portion
(Undefined)
0009 (fixed)
001 to 999
0001 to 9999
0000 to 9999
000 to 999
If +: 20 (' ')
If – : 2D ('–')
Same as detection lower limit
Appendix K
Data
Example –123.4567
+3 4 5 6 7
+4 0 1 2 3
+5 2 D 0 0
413