User Management; User Table; User Config - TP-Link TL-SG2424 User Manual

Type:
Preferred
Lifetime/Valid
Lifetime:
Status:
Tips:
After adding a global IPv6 address to your switch manually here, you can configure your PC's
global IPv6 address in the same subnet with the switch and login to the switch via its global IPv6
address. For the detailed instructions, please refer to

4.2 User Management

User Management functions to configure the user name and password for users to log on to the
Web management page with a certain access level so as to protect the settings of the switch from
being randomly changed.
The User Management function can be implemented on User Table and User Config pages.

4.2.1 User Table

On this page you can view the information about the current users of the switch.
Choose the menu System→User Management→User Table to load the following page.

4.2.2 User Config

On this page you can configure the access level of the user to log on to the Web management
page. The switch provides two access levels: Guest and Admin. The guest only can view the
settings without the right to configure the switch; the admin can configure all the functions of the
switch. The Web management pages contained in this guide are subject to the admin's login without any
explanation.
Displays the configuration mode of the global address.
Manual: Indicates

configured manually.
Auto: Indicates that the corresponding address is created

automatically using the RA message or obtained from the
DHCPv6 Server.
Displays the preferred time and valid time of the global address.
Displays the status of the global address.
Normal: Indicates that the global address is normal.

Try: Indicates that the global address may be newly

configured.
Repeat: Indicates that the corresponding address is duplicate.

It is illegal to access the switch using this address.
Appendix
Figure 4-11 User Table
27
that the corresponding
B.
address is