Module Assignments; File Handling Messages; Appendix A - Datamax a-class mark ii Operator's Manual

Appendix A

Module Assignments

Designator
1024 KB
D
(default size)
512 KB
[2]
G
See [3],
below.
See [3],
X
below.
Y 128 KB
[1]
When power is removed from the printer, stored data will be lost.
[2]
Availability and size is dependent upon Main Logic CCA type; reference the Configuration Label.
Also, Flash memory has a limited number of writes (approximately 100,000) and is intended for
permanent (or semi-permanent) storage.
[3]
Modules G and X are partitioned to equal the sum of the total space available, approximately
6.5MB.

File Handling Messages

Depending upon the module and operation selected, several messages are possible when using the
file handling system:
A-Class
Module Assignments
Size
[1]
DRAM . Default, as assigned (see SYSTEM SETTINGS /
DEFAULT MODULE, Section 4.2.4). Storage for graphics,
fonts, and label formats.
FLASH. Storage for graphics, fonts, and label formats.
FLASH (Main Logic CCA). Storage for graphics, fonts, and
label formats.
FLASH (Main Logic CCA). Storage for graphics, fonts, and
label formats.
FLASH. Main Logic CCA. Reserved for EFIGS.
Type / Use
125