Datamax a-class mark ii Operator's Manual page 136

Displayed
Message
The copy or format
FAILED
request has failed.
An existing file of the
FILE EXISTS,
same name and type
OVERWRITE?
was found.
Formatting has been
MODULE
denied because the
PROTECTED
module is protected.
No associated files can
NO FILES
be found to perform the
AVAILABLE
requested action.
The file type requested is
NOT SUPPORTED
not supported.
The file requested will be
PROTECTED,
copied to a protected
COPY FILE?
module.
The module is
UNFORMATTED
unformatted.
126
File Handling Messages
Description Possible Solution(s)
Insufficient space exists to store the file or
the module is protected - try storing to a
different location. (If the problem persists,
this could indicate a hardware problem.)
Select YES to overwrite, or NO to exit.
Unprotect the module.
Ensure the file is present:
Following a Print File request, this is
normal when no files are available for
printing (also note that some files will
print only the file name);
Following a Process File request, this is
normal when no files are available for
processing (also note that some files
may not display); or,
Following a Copy File request, this is
normal when no files are available for
copying (also note that internal
database files cannot by copied).
Recheck the type of file requested for
printing or processing, and ensure that it
matches one of the available types for that
function.
Select YES to override protection and copy
the file, or NO to exit.
Format the module.
FORMAT MODULE will erase all
data in the selected memory.
A-Class