Appendix A
Module Assignments
Designator
1024 KB
D
(default size)
512 KB
[2]
G
See [3],
below.
See [3],
X
below.
Y
128 KB
[1]
When power is removed from the printer, stored data will be lost.
[2]
Availability and size is dependent upon Main Logic CCA type; reference the Configuration Label.
Also, Flash memory has a limited number of writes (approximately 100,000) and is intended for
permanent (or semi-permanent) storage.
[3]
Modules G and X are partitioned to equal the sum of the total space available, approximately
6.5MB.
File Handling Messages
Depending upon the module and operation selected, several messages are possible when
using the file handling system:
A-Class
Module Assignments
Size
[1]
DRAM
. Default, as assigned (see SYSTEM SETTINGS /
DEFAULT MODULE, Section 4.2.4). Storage for graphics,
fonts, and label formats.
FLASH. Storage for graphics, fonts, and label formats.
FLASH (Optional Expanded Flash Main Logic CCA).
Storage for graphics, fonts, and label formats.
FLASH (Optional Expanded Flash Main Logic CCA).
Storage for graphics, fonts, and label formats.
FLASH. Main Logic CCA. Reserved for EFIGS.
Type / Use
123