Datamax a-class mark ii Operator's Manual page 69

Communications (continued)
Menu Item
FTP
ENABLED
DISABLED
MTU
(512 - 65515)
01500
GRATUITOUS ARP
(0 - 2048)
0000
PORT NUMBER
(1 - 65535)
09100
TCP KEEPALIVE
ENABLED
DISABLED
DUPLEX CAPABILITY
AUTO-NEGOTIATE
100BASET HALF
100BASET FULL
10BASET HALF
10BASET FULL
ADVERTISE
CAPABILITY
AUTOMATIC
ALL CAPABILITIES
A-Class
Sets File Transfer Protocol to transfer data,
where:
Allows FTP.
Disables FTP.
Sets the Maximum Transmission Unit packet size, where:
Is the packet size, in bytes.
Sets the Address Resolution Protocol notification
rate, where:
Is the time, in minutes.
Sets the network communications port, where:
Is the Port Number.
Allows monitoring of an open connection to detect any
disconnects not properly closed, including reset access
points and unplugged printers, where:
Keeps monitoring active.
Closes such a disconnection after 2.5 minutes.
Sets the communication capability for the Wired
network, where:
Automatically selects the best type.
Selects 100 Mbit/s half duplex (in both directions,
one way at a time) operation.
Selects 100 Mbit/s full duplex (in both directions,
simultaneously) operation.
Selects 10 Mbit/s half duplex (in both directions,
one way at a time) operation.
Selects 10 Mbit/s full duplex (in both directions,
simultaneously) operation.
Transmits the printer's communication capability
for the Wired network, where:
Advertises the DUPLEX CAPABILITY set value.
Advertises all possible values for DUPLEX
CAPABILITY.
Details
59