Datamax a-class mark ii Operator's Manual page 68

Hide thumbs Also See for a-class mark ii:
Table of Contents

Advertisement

Communications (continued)
Menu Item
SUBNET MASK
255.255.255.000
GATEWAY
192.168.010.026
SNMPTRAP DESTINATION
000.000.000.000
IP DISCOVERY
ENABLED
DISABLED
SNMP
ENABLED
DISABLED
ADVANCED
TELNET
ENABLED
DISABLED
58
Specifies the static Subnet Mask Address, where:
Is the address in standard octet format.
Specifies the network Gateway Address, where:
Is the address in standard octet format.
Specifies the SNMP Trap Address, where:
Is the address in standard octet format where
SNMP traps will be sent when SNMP service is
installed on your receiver.
When zeroed, no traps are sent.
Controls IP Address discovery, where:
Broadcasts over the network at startup to receive
addresses from the responsible server. Manual
modifications to IP Address, Subnet Mask, or
Gateway are not allowed; and, if no server is
found, the specified static value will be used.
A server assigned IP address takes
precedence over any static address
stored in the interface.
Uses the stored static IP, Subnet Mask, and / or
Gateway Address.
Allows management protocols, where:
Sends messages to SNMP-compliant devices.
Sends no messages.
Sets advanced networking functions and
parameters, where:
Sets Telnet protocol to transfer data, where:
Allows Telnet.
Disables Telnet.
Details
A-Class

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the a-class mark ii and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents