Datamax a-class mark ii Operator's Manual page 61

System Settings (continued)
Menu Item
ROW EMULATION
(XXX – XXX DOTS)
XXX
SOP EMULATION
DISABLED
110 (PRODPLUS)
220 (ALLEGRO)
250 (PRODIGY)
BACK AFTER PRINT
MODE
DISABLED
ENABLED
BACKUP DELAY
(0 – 255)
000
FONT EMULATION
STANDARD FONTS
CGTIMES
A-Class
Allows the row dot count to be adjusted, where:
Is the printed number of dots per inch (or mm)
thereby reducing or enlarging the length of the
produced format; see Appendix B.

No adjustment occurs at the default setting.
Allows SOP functions with backward compatibility
when printing legacy model label formats, where:

Two labels will automatically feed to establish
the selected position.
Uses the standard print position.
Emulates the Prodigy Plus
Emulates the Allegro
Emulates the Prodigy
Determines media movement when a cutter,
present sensor, peel and present, or GPIO is
enabled, where:
Repositions media, where:
Movement occurs only when the next label is
ready to print, minimizing edge curling.
Movement occurs according to BACKUP DELAY
timing after a cut, cleared sensor, or SOP to allow
fastest throughput.
(1/50s) Determines repositioning timing, where:
Is the specified lapse (in fiftieths of a second)
between new format processing and label
retraction.
Allows font substitution, where:
Prints using standard (internal) fonts.
Prints using CG Times font.
Details
®
print position.
®
print position.
™
print position.
51