Standard Features - Datamax a-class mark ii Operator's Manual

1.1.1 Standard Features

This printer offers the following standard features:
Right-handed or left-handed configurations
•
Electronics card cage
•
8 MB Flash downloadable program memory
•
16 MB DRAM memory
•
Host computer accessible memory for object temporary storage
•
Two RS-232 serial interfaces (one of which is also RS-422/RS-485 capable)
•
One IEEE 1284 compliant parallel interface
•
One Ethernet 10/00 interface
•
One USB v1.1 interface
•
A programmable GPIO Port
•
Backlit graphics display
•
EFIGS (English, French, Italian, German, and Spanish) display languages
•
Industry standard bar code symbologies
•
Time stamp at print capability with time and date battery back-up
•
Static brushes
•
Printhead resistance verification
•
Configurable fault-handling capability with reprint and void selections
•
Parse error-tolerant command language interpretation
•
Internal test labels for verification, validation, and configuration
•
Multiple setup restore capability
•
Paper retract control after print
•
Ribbon low detection and warning
•
Power-up, mode, and resident option hardware diagnostics
•
Option hardware auto-detection
•
Media peel bar
•
Media inch counters
•
Input line mode (ASCII text input) capability
•
Firmware upgrades downloadable
•
AGFA Scaleable Font Engine featuring dynamic font attributes
•
2 A-Class Mark II