Datamax a-class mark ii Operator's Manual page 67

Communications (continued)
Menu Item
WLAN ADHOC
NO
YES
SET FACTORY
DEFAULTS
NO
YES
WLAN
MODE
ENABLED
DISABLED
BSS ADDRESS
 000.000.000.000
SIGNAL READINGS
IP ADDRESS
192.168.010.026
A-Class
Selects the DMXrfNetII default parameters,
where:
Exits the menu item without changing the current
settings.
Restores WiFi defaults and initiates infrastructure
mode with an SSID of "Any." All existing access
point associations will be deleted then established
with the closest available. (Useful when moving
the printer to a geographically distant location.)
Returns the factory-programmed values, where:
Exits the menu item without changing the current
settings.
Restores the default settings.
Controls the communications settings for the
DMXfNetII Card, where:
Selects between Wired or WiFi operation, where:
Enables the WiFi interface.
Enables the wired interface.
Specifies the static IP address of the WiFi bridge
module.

If DHCP is Enabled, this parameter will be
ignored.
Is the address in standard octet format.
Displays the WLAN signal and noise ratios.
Specifies the static IP Address; where:
Is the address in standard octet format.
Details
57