Adding or Deleting PPIs
You can add PPIs to the machine using a USB memory device as follows.
How to Add or Delete PPIs
To add a PPI:
1.
Display the list of PPIs (see
2.
Select
(on your left hand side at the rear of the base. (See
3.
Press [OK] . The USB memory device content is displayed.
9
4.
Select a PPI to load into the machine and press [OK].
The PPI list is updated with the new PPI.
To delete a PPI:
1.
Select the PPI to delete and press [Delete].
2.
Confirm deletion, otherwise press [Cancel].
The system updates the PPI list.
290
How to Display the List of PPIs
Add new and connect the memory device to an USB port of the machine
on page 289).
Base connectors
on page 333 ).