Sending E-Mail/I-Faxes; Storing New Addresses - Canon imagerunner advance 8205 Setup Manual

6
Specify the following settings.
In this example, the following settings are specified:
[SMTP Server]: 192.168.1.2
[E-Mail Address]: xxx01@example.com
2
You can specify the desired settings for <SMTP RX> and <POP>.
For information on the settings, see e-Manual > Settings/
Registration > Common Communication Settings for E-Mail/I-Fax.
7
Press [Authent./Encryption].
8
Specify the following settings → press [OK].
In this example, the following settings are specified:
<SMTP Authentication (SMTP AUTH)>: [On]
[User Name]: user_name
[Password]: password
The settings for sending e-mail/I-faxes are now set.
30

Sending E-Mail/I-Faxes

Register e-mail/I-fax destinations in the Address Book before
sending e-mail.

Storing New Addresses

When sending a scanned original using e-mail, register the
information for the destination.
1
Press [Scan and Send].
2
Press [Address Book].