Power Distribution Cables
Removal
1. Perform the "Power Supply or Cooling Unit" removal procedure on page 4-61 to remove
the power supply and either the cooling unit or optional power supply.
2. Perform the "I/O Module" removal procedure on page 4-67.
3. Carefully cut the cable restraint straps for the power distribution cable.
4. Disconnect connectors P10, P11, P12, and P12A located on the lateral planar 2 card.
P12A
P12
P11
P10
Lateral
Planar 2
Card
Power Distribution
Cable
Cable
I/O Module
Restraint
Strap
Primary Power
Supply Location
Cooling Unit or
Optional Power
Supply Location
Removal and Replacement
4-79