Table of Contents
Advertisement
Modifying Dial-In Phone Numbers
These parameters can be changed under SystemGuard using the maintenance menu, or
under AIX using the diag command.
SystemGuard Maintenance Menu
Starting from the main maintenance menu:
1. Enter 8 to set parameters.
2. Enter 3 for phone numbers.
3. Enter 4 for the dial-in phone number.
4. Supply a new phone number.
AIX Diag Command
Starting from the Service Aids Selection menu:
1. Select the BUMP Service Aids option.
2. Select the Display or Change Flags and Configuration option.
3. Select the Change Remote Support Phone Numbers option.
4. Select the System Dial-In option.
5. Supply a new phone number.
Modifying Dial-Out Phone Numbers
These parameters can be changed under SystemGuard using the maintenance menu, or
under AIX using the diag command.
SystemGuard Maintenance Menu
Starting from the main maintenance menu:
1. Enter 8 to set parameters.
2. Enter 3 for phone numbers.
3. Select the dial-out phone number to modify (service center or customer hub).
4. Supply a new phone number.
AIX Diag Command
Starting from the Service Aids Selection menu:
1. Select the BUMP Service Aids option.
2. Select the Display or Change Flags and Configuration option.
3. Select the Change Remote Support Phone Numbers option.
4. Select the Service Center Dial-Out or Customer Hub Dial-Out option.
5. Supply a new phone number.
Modifying SystemGuard Parameters
B-5
Advertisement
Table of Contents
