Table of Contents
Advertisement
electronic mode switch, modifying, B-6
flags, 2-9
flash EEPROM, reloading, B-7
maintenance menu, 2-21
disable service console, 2-25
display BUMP error log, 2-25
display configuration, 2-22
device level, 2-24
system level, 2-22
unit level, 2-22
enable service console, 2-25
off-line tests, 2-28
build test list, 2-29
execute test list, 2-32
modify/display test list, 2-31
power off, 2-25
reset, 2-25
set national language, 2-38
set parameters, 2-32
phone numbers, 2-34
power-on command parameters, 2-33
set configuration, 2-34
voltage margins, 2-33
system boot, 2-26
menus, 2-11
maintenance menu, 2-21
stand-by menu, 2-12
modem configuration, 2-47
modifying service support parameters, B-1
parameters, 2-9
phases, 2-4
boot, 2-5
Boot to AIX load and run-time, 2-9
init, 2-5
init to Boot, 2-9
X-6
Service Guide
Maint to Boot, 2-9
maintenance, 2-5
run-time, 2-5
stand-by, 2-4
stand-by to init, 2-6
physical key, 2-4
power, 2-2
remote authorization flag, modifying, B-3
remote operation configuration, C-1
service support parameters
changing flags and parameters, B-3
default values, B-1
stand-by menu, 2-12
display configuration, 2-13
I2C maintenance, 2-19
set configuration, 2-17
set flags, 2-15
set unit number, 2-16
SSbus maintenance, 2-18
test groups, A-1
descriptions, A-3
using, 2-1
working with, 2-10
SystemGuard parameters, modifying, B-1
T
typical rail installation, 1-16
V
voltage margins, setting, 2-20, 2-33
Advertisement
Table of Contents
