IBM 7015-R50 Installation And Service Manual page 47

How to Display the System Configuration
The system configuration can be displayed through the STAND-BY MENU or through the
MAINTENANCE MENU.
Displaying Configuration through the Stand-By Menu
This option displays the system configuration table. This configuration can be viewed on the
LCD of the Operator Panel if the console is not configured. This is done by pressing the
reset button with the mode switch in the Service position.
To display the configuration of the system, enter the STAND-BY MENU, and from the Main
menu, select Display Configuration (option 0). The first-level screen is displayed with
features and devices that can be configured.
Here is an example of the display configuration screen for a 7013 J Series system. The
screens for the 7015 R30, R40, and R50 are similar:
SID TM
SID Y3
CPU conf
FLASH_FW 0704
OPP
SP
CPU0
CPU2
MC0
MC2
SIB10 E38042
SIB11
SIB21
SIB12
SIB22
SIB13
SIB23
Hit Return
Display Configuration
7013J30 45067
7fffff003935303730370000
CCCCAAAA
MM size 0080
D78610 19H0494
D78605 19H0471
D78605 19H6472
D78605 19H0473
19H0310
SID Y2
UNIT PAAAAAAA
MM conf CCAACCAAAAAAA
OP_KEY NRM E_KEY
IOC E38030 96G4400
CPU1 D78605 19H6472
CPU3
MC1 D78605 19H0473
MC3
PS0 D29655 11H5114
PS1
PS2
PS3
Using SystemGuard
00045067
40
SRV
2-13